ASRock IMB-A160-H AMD SATA RAID Driver
ASRock IMB-A Series IPC Motherboard - Embedded AMD APU T40E Mini-ITX Format, Max 4GB DDR3 SO-DIMM, SATA 6Gbps (RAID), Dual LAN Ports. Disclaimer: Specifications and information contained in this documentation are ASRock Rack assumes no responsibility for any errors or omissions that may rd Storage Configuration H/W Monitor WHEA Configuration Easy RAID Installer M.2 slot (PCIe Gen3 x4 & SATA3)* Storage SATA Controller Additional SATA. Specifications: CPU AMD Embedded GSeries APU T56N/T48E/T40E Supports AMD Virtualization Technology (AMDV) Core Number 2.
|Supported systems:||ALL Windows 32x/64x|
|Price:||Free* [*Free Regsitration Required]|
ASRock IMB-A160-H AMD SATA RAID Driver
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Rack Inc. Products and corporate names appearing in this documentation ASRock IMB-A160-H AMD SATA RAID or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe.
ASROCK IMB-A160-H User Manual
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock Rack. ASRock Rack assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents ASRock IMB-A160-H AMD SATA RAID this documentation, ASRock Rack does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock Rack, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock Rack has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
Operation is subject to the following two conditions: When you discard the Lithium battery in ASRock IMB-A160-H AMD SATA RAID, USA, please follow the related regulations in advance. It delivers excellent performance with robust design conforming to ASRock Rack s commitment to quality and endurance. In this manual, chapter and 2 contains introduction of the motherboard and stepby-step guide to the hardware installation.
Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock Rack website without further notice. ASRock Rack s Website: If you require technical support related to this motherboard, please visit our website for specific information about the model you are using.
If you install the drivers only, it will pass the WHQL tests. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility.
- Full Text Bug Listing
- ASRock Industrial PC IMB-AH Drivers Download for Windows 7, , 10
- Other Motherboard ASRock (华擎) IMB-A160-H drivers and software:
Debug 6 9 17 No. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard.
Download 驱动程序 for Motherboard ASRock (华擎) IMB-A160-H Windows 10
Failure to do so may cause physical injuries to you and damages to motherboard components. Screw Holes Place screws into the holes indicated by circles to secure the motherboard to the chassis. Do not over-tighten the screws!
Doing so may damage the motherboard. Unplug the power cord from the wall socket before touching any components. To avoid damaging the motherboard s components due to static electricity, NEVER place your motherboard directly on the carpet or the like.
Download Files form ASRock Inc.
Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components. Hold components by the edges and do not touch the ICs.
Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws!
Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Before you insert the Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.