SIIG CYBERSERIAL DUAL PCIE-DB WINDOWS 8 X64 TREIBER

Buy a SIIG DP CyberSerial PCIe - serial adapter or other Serial Boards at Additionally, this dual profile serial adapter works with PCI Express slot with Connector Type: 9 pin D-Sub (DB-9); Interface: RS; Qty: 1; Type. SIIG CyberSerial 4-port PCI Serial Adapter JJ-PS7 SIIG DP CyberParallel Dual PCIe JJ-ES1 Digi Edgeport/ DB-9 Adapter As a leading manufacturer of quality computer connectivity products since , SIIG brings to market a broad range of upgrade products. These products bridge.

Most serial devices do not require additional power through the serial port. Refer to your serial device's manual for more information.

SIIG INC. Cyberserial 4s PCI - JJ-PS7 -

The jumpers can be removed if the serial ports aren't configured for power output. Since the design of computer cases and motherboards vary, refer to your computer s reference manual for further information, if needed.

Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer s case for a few seconds.

Avoid any contact with internal parts and handle cards only by their external edges. Turn OFF the power to your computer SIIG CyberSerial Dual PCIe-DB any other connected peripheral devices. Unplug the power cord from the back of the computer. Remove your computer s cover.

SIIG DP CyberSerial PCIe - Serial adapter - PCIe low profile - RS-232

Remove the slot bracket from an available PCI slot. Change JP1 and JP2 jumper settings to the desired voltage only if your serial device needs additional power from the serial port.

However, most serial devices do not require additional power. For more information see Figure 1 on page 2. The jumpers can be removed if power output is not required. To install the card, carefully align the card's bus connector with the selected PCI slot on the motherboard. Push the board down firmly, but gently, until it is well seated. Replace the slot bracket's holding screw to secure the card. Replace the computer cover and reconnect the power cord. Insert the driver CD, SIIG CyberSerial Dual PCIe-DB click Other SIIG CyberSerial Dual PCIe-DB.

From the Insert Disk window, click OK. When the Copying Files dialog box appears, type in D: Restart Windows to complete the installation. Select Search for the best driver for your device Recommendthen click Next.

CyberSerial Dual PCI Quick Installation Guide - PDF

Insert the driver CD, check Specify a location, uncheck the other boxes, type in D: Click Next, then Finish. Repeat steps Restart Windows to complete the installation.

Insert the driver CD, check Specify a location, uncheck the other box, type in D: Repeat steps 1 and Click Next, Next, then Finish. Insert the driver CD, type in D: Click Next when the SIIG CyberSerial Dual PCIe-DB window appears.

Choose Install, then click Next. Click Yes, then click Exit.

• Cheap Pcie To Serial, find Pcie To Serial deals on line at
• Siig Cyberserial 2-port Pci Express Serial Adapter - JJ-E10DS3
• SIIG CyberSerial 2-port PCI Express Serial Adapter - JJ-E10D11-S3
• Special offers and product promotions
• CyberSerial Dual PCI Quick Installation Guide

To Verify Windows NT 4. Two new COM ports will be assigned when successfully installed. Select Search for a suitable driver for my device recommendedand click Next.

Add Our SIIG Computer Components To Your System

Check Specify a location, uncheck the other boxes, and click Next. Click Next and Finish.

Repeat steps two more times. Insert the driver CD, check Include this location in the search, uncheck the other check box, SIIG CyberSerial Dual PCIe-DB in D: Our driver has been tested for stability and compatibility. Repeat steps three more times.